So, between having a tween in the house, and our own preference to avoid salacious or overly profane content on the internets, we like to keep what content we consume fairly open with one another.
We also rather dislike excessive and intrusive advertising while we are online. As such, all of our laptops have the uBlock Origin extension installed nearly by default. Also, I cannot recommend the Shut Up extension enough. It makes Youtube bearable.
Recently we have noticed that while watching Youtube videos on our two Roku televisions, many educational videos have suddenly been coming up as "unable to view in Restricted Mode - switch to a G Suite account" or some such drivel. At first we blew it off, but lately it has seemed as though almost half the videos we have tried to watch have been flagged this way, and it's been very annoying.
Yes, I have gone into my account and ensured that "Restricted Mode" was off.
Yes, I have uninstalled and reinstalled the application on the Roku.
Finally this morning I believe I have cracked the issue. It wasn't with the Roku at all.
One quick and easy way to protect your family internet use is to switch from your ISP's default DNS to something like OpenDNS - something I have done for years to "good" effect. Questionable content is always a matter of a combination of personal taste and playing whack-a-mole. OpenDNS does a great job of it, and it was my go-to and will likely remain so.
But, in an effort to reduce online advertising - I recently switched from OpenDNS to AdGuardFamilyProtectionDNS. I'm also all about streamlining, so instead of doing this on each of our laptops, I always just make these changes at the router level, and the laptops just have DHCP set to automatic (with occasional IP reservations again at the router level).
Well, on a lark today, I switched back from AdGuard to OpenDNSFamilyShield and immediately, the videos resumed playing as we expected! Awesome!
So that's about it - if you're getting this restricted mode issue on your Roku devices, it's likely because you have some sort of DNS blocking issue at the router level (Roku devices seem to be unable to set their own IP and DNS addresses - at least I could find no evidence that it is possible). You'll have to log in to your router and switch up the DNS settings from there.
I'd recommend Google's DNS if you want things wide open. 8.8.8.8 and 4.4.4.4.
I'd strongly recommend OpenDNSFamilyShield if you want to block loads of crap, but still have a seamlessly functioning internet for adults. 208.67.222.123 and 208.67.220.123.
Cheers!
Tuesday, 7 January 2020
Sunday, 29 September 2019
Bluetooth Mouse Connection Issues Solved
EDIT: This did not work consistently, and I ended up chucking out all the cheap Aliexpress Mice I had purchased. I have given up on cheap Bluetooth Mice for now. I believe good quality ones exist, but I haven't found them yet. I will leave this up as a guide for others who may wish to exhaust all options before following in my footsteps...
At least, I hope they are solved finally. I'll revisit and delete or modify this post if it's just been a fluke.
I recently opted to purchase several mid-priced bluetooth mice from Aliexpress. After using the first one for an afternoon, the dropped connections that only seemed to be solved by switching it off and on again were really getting me frustrated. I changed out my usual AAA rechargeable batteries for brand new alkaline ones, but that didn't solve the problem.
Now I think I have figured that the issue is with the default Windows settings for bluetooth - you need to hit up the Device Manager (WIN + X) and then the bluetooth devices. Pick your adapter, either generic, or Intel, or whichever it may be, and then under power management, turn OFF the option for Windows to be able to control the power to it.
Not sure why, but Windows will shut it off even if you've only left it dormant a few seconds. Blah.
I am not blaming Microsoft, perhaps these cheap devices aren't using standard protocols or something... But at least this is a quick and easy fix.
At least, I hope they are solved finally. I'll revisit and delete or modify this post if it's just been a fluke.
I recently opted to purchase several mid-priced bluetooth mice from Aliexpress. After using the first one for an afternoon, the dropped connections that only seemed to be solved by switching it off and on again were really getting me frustrated. I changed out my usual AAA rechargeable batteries for brand new alkaline ones, but that didn't solve the problem.
Now I think I have figured that the issue is with the default Windows settings for bluetooth - you need to hit up the Device Manager (WIN + X) and then the bluetooth devices. Pick your adapter, either generic, or Intel, or whichever it may be, and then under power management, turn OFF the option for Windows to be able to control the power to it.
Not sure why, but Windows will shut it off even if you've only left it dormant a few seconds. Blah.
I am not blaming Microsoft, perhaps these cheap devices aren't using standard protocols or something... But at least this is a quick and easy fix.
Tuesday, 28 May 2019
Macrium Reflect Mysterious Opening Windows - Solved!
I love Macrium Reflect - not denying that. It works very well for imaging drives (except when it doesn't - but that's usually a hardware issue with the drive itself).
But lately it's been acting weird for me. A few times a day, I would notice that there was a nearly empty window that had opened itself up and only had a "close" button.
Today I finally took the time to use the drop down menu at the top and realized that it was a window opened by a certain hotkey combination - alt-ctrl-m.
This may not be a common one for many of you, but I use that combo a few times a day to <comment> in Google Sheets.
I just unchecked the "use hotkey" radio box, and I anticipate all should be well with the world again.
But lately it's been acting weird for me. A few times a day, I would notice that there was a nearly empty window that had opened itself up and only had a "close" button.
Today I finally took the time to use the drop down menu at the top and realized that it was a window opened by a certain hotkey combination - alt-ctrl-m.
This may not be a common one for many of you, but I use that combo a few times a day to <comment> in Google Sheets.
I just unchecked the "use hotkey" radio box, and I anticipate all should be well with the world again.
Thursday, 18 April 2019
What to do when .gdoc and .gsheet no longer open correctly.
Okay, so here's a problem I've had for a long time and only just ciphered out this morning.
I use Dropbox for most of my file syncronizing needs. It is very frustrating to use - I don't approve of some of the business decisions they have made as a company, they have killed off several useful features (currently the predicted time of sync), and they don't have a good way to share plans with family.
But I also really enjoy using Google Docs - it's very helpful to not have to have an office suite installed on my smaller computers, and the instant syncronizing of spreadsheets and documents is a real boon.
I would have switched to Google Drive last week, if only they offered a 1TB package similar to what Dropbox does... Instead, they jump from 200GB (too little) to 2TB (too much) - I need that Goldilocks zone!
Anyway, I keep Google Backup and Sync running in the background so I have a local copy of my documents - they would be pretty devastating to lose if something ever happened to my Google Account. I also like to organize the documents on my local drive to help keep them clear in my head.
The issue I had was that sometimes I'd see a document locally and want to open it from my drive, rather than try to use the web-based documents interface, which isn't very intuitive for an old-timer like me.
Somehow the association must have broken at some point, and of course, I tried to open them with Chrome - a natural assumption, as you view and manipulate them in Chrome. Unfortunately, they wouldn't open. You'd get a cryptic address that CONTAINED the online address for the file, with other settings, but didn't actually OPEN the file.
Google searches were surprisingly unhelpful! Hence this post to help anyone out...
Change the association for .gdoc and .gsheet from Chrome to Google Backup and Sync! It then passes along the proper address to Chrome anyway and things work as expected.
So in file explorer, you right click, scroll down to "open with..." and on the next screen, first make sure you check the box "always use this programme to open files of this type" and then select backup and sync as the programme to open with. If it isn't immediately displayed, select the more option, and if it still isn't there, then select that you will search for a programme, and drill down to the backup and sync executable (C:\Program Files\Google\Drive\googledrivesync.exe on my machine).
It's as simple as dat! (Simple, but not easy - at least for me, and seemingly many, many others...)
I use Dropbox for most of my file syncronizing needs. It is very frustrating to use - I don't approve of some of the business decisions they have made as a company, they have killed off several useful features (currently the predicted time of sync), and they don't have a good way to share plans with family.
But I also really enjoy using Google Docs - it's very helpful to not have to have an office suite installed on my smaller computers, and the instant syncronizing of spreadsheets and documents is a real boon.
I would have switched to Google Drive last week, if only they offered a 1TB package similar to what Dropbox does... Instead, they jump from 200GB (too little) to 2TB (too much) - I need that Goldilocks zone!
Anyway, I keep Google Backup and Sync running in the background so I have a local copy of my documents - they would be pretty devastating to lose if something ever happened to my Google Account. I also like to organize the documents on my local drive to help keep them clear in my head.
The issue I had was that sometimes I'd see a document locally and want to open it from my drive, rather than try to use the web-based documents interface, which isn't very intuitive for an old-timer like me.
Somehow the association must have broken at some point, and of course, I tried to open them with Chrome - a natural assumption, as you view and manipulate them in Chrome. Unfortunately, they wouldn't open. You'd get a cryptic address that CONTAINED the online address for the file, with other settings, but didn't actually OPEN the file.
Google searches were surprisingly unhelpful! Hence this post to help anyone out...
Change the association for .gdoc and .gsheet from Chrome to Google Backup and Sync! It then passes along the proper address to Chrome anyway and things work as expected.
So in file explorer, you right click, scroll down to "open with..." and on the next screen, first make sure you check the box "always use this programme to open files of this type" and then select backup and sync as the programme to open with. If it isn't immediately displayed, select the more option, and if it still isn't there, then select that you will search for a programme, and drill down to the backup and sync executable (C:\Program Files\Google\Drive\googledrivesync.exe on my machine).
It's as simple as dat! (Simple, but not easy - at least for me, and seemingly many, many others...)
Friday, 18 January 2019
Problems Imaging a microSD card with Win32DiskImager or balenaEtcher- Access is Denied Error 5. Bonus Safe Mode From Windows 10 Easy Access.
So I dusted off our RetroPie and was trying to reimage the microSD card in it. Should have been easy-peasy, but instead, it was very frustrating. I tried using the recommended "balenaEtcher" but got nowhere but unhelpful "denied" type errors. I also tried using the tried and true Win32DiskImager and still received the same messages.
I puzzled over it a few hours, repartitioning, reformatting, trying to use my phone or camera to low level format the card, using different SD to USB adapters and different cards, all to no avail.
Then I contemplated that perhaps Windows 10 was doing fritzy stuff in the background with the card.
A quick reboot into safe mode, and things worked just fine. It is annoying, and takes twice as long to do, but it works.
Safe mode in most versions of Windows wasn't challenging to access by tapping F8 while booting up. Windows 10 has changed that, so it's easiest to get access by holding down the Windows key and pressing "R" (for run). Then type in "msconfig" and tap enter. Select the "boot" tab, and then check the box for "Safe Boot".
Apply/OK (what purpose does having two keys serve?) and you're all set. Reboot your system, image your card, and reboot again!
I puzzled over it a few hours, repartitioning, reformatting, trying to use my phone or camera to low level format the card, using different SD to USB adapters and different cards, all to no avail.
Then I contemplated that perhaps Windows 10 was doing fritzy stuff in the background with the card.
A quick reboot into safe mode, and things worked just fine. It is annoying, and takes twice as long to do, but it works.
Safe mode in most versions of Windows wasn't challenging to access by tapping F8 while booting up. Windows 10 has changed that, so it's easiest to get access by holding down the Windows key and pressing "R" (for run). Then type in "msconfig" and tap enter. Select the "boot" tab, and then check the box for "Safe Boot".
Apply/OK (what purpose does having two keys serve?) and you're all set. Reboot your system, image your card, and reboot again!
Friday, 4 January 2019
Accessing Hidden Advanced Settings on a Linksys EA9200 Router
I'm having a few regrets about supplying this router to a client. It seems to have some spotty connection issues, so I've swapped it for an Asus and brought it home to test on my own home network.
It was very disheartening to realize that it doesn't support any third party firmware (no DD-WRT, OpenWRT or Tomato?!)
In the meantime, I wanted to play with some of the more advanced settings on it to suit my own situation - and low and behold, they've not provided access to those settings for owners by any documented manner.
Fortunately, I did find a reference to similar models having a "hidden" advanced settings screen that does indeed work on this model too.
When you hit up the home screen of the web interface, simply substitute "advanced-wireless" for "home" in the address bar, and you'll be all set.
Enjoy! If I discover anything earth shattering, I'll try to report back.
It was very disheartening to realize that it doesn't support any third party firmware (no DD-WRT, OpenWRT or Tomato?!)
In the meantime, I wanted to play with some of the more advanced settings on it to suit my own situation - and low and behold, they've not provided access to those settings for owners by any documented manner.
Fortunately, I did find a reference to similar models having a "hidden" advanced settings screen that does indeed work on this model too.
When you hit up the home screen of the web interface, simply substitute "advanced-wireless" for "home" in the address bar, and you'll be all set.
Enjoy! If I discover anything earth shattering, I'll try to report back.
Wednesday, 12 December 2018
Getting a Canon ImageRUNNER ADVANCE C2225 to Scan to Email
Ugh, this is another of those tales of hours spent trying to cipher out cryptic and unintuitive interfaces that are way too unnecessarily complicated.
This multifunction machine was operating correctly at one location, but once moved ten minutes down the road, the scan to email function completely ceased operation.
It's also really, really frustrating that this machine just fails to send, with next to no feedback as to why.
So, let's dive in and see what happened here.
We moved the machine from one township to another. Once moved, all local functions were fine, but getting it to scan to email no longer worked. The outgoing scans simply came back as "NG" on the log screen.
My first mistake - not asking for "details" right away - and then mistake two - not realizing that the "details" page, when consulted, still was really useless. You get a three digit error code and nothing else. Here is the link for deciphering these error codes.
For starters, to make any changes either on the panel, or the web-based interface, you need to log in to the machine as an admin. The default admin name and password are both "7654321" - it will nag you to change these every time you log in. Be ready to skip this unless you are sure you want to swap them out. In my case, it was a SOHO, so there wasn't really a concern about locking down these settings.
Next up, you will need to consult your ISP about their outgoing SMTP ports - in our case, it was a fairly benign 587, but the scanner didn't default to that. I'll be jiggered if it's nearly impossible to find where to change that setting. You need to press the Settings/Registration button, quickly followed by 2 and 8 simultaneously, then Settings/Registration button once again. Then choose mode. Then choose copier (?), then choose option, then choose Network, then press <Level 1> so that it switched to <Level 2>.
Whew, then clicking directly on SMTPTXPN you can enter in a new port.
Press the Reset button to work your way back out of this menu.
Next up, I will relate the settings that worked for us, not necessarily what will work for you, but it should get you closer.
Now on the regular menu, hit up the Settings/Registration button again, and log in. Use the defaults if it hasn't been changed, otherwise, you're on your own.
Then Functions, Send, and Communication Settings.
On the first screen, enter your email address and SMTP server. POP RX is off, SMTP RX is on.
Next, SMTP TX is on, SMTP RX is on, POP should be greyed out.
Next, SMTP Authentication is on, display auth. screen is off, and the others are greyed out. Username is the full email address, and password is the email password.
That should be it. It took me pretty much a full day to finally get this just so. Hopefully it helps someone out there?
If it does fail, the error codes may be of limited use. Mine were throwing POP errors until I disabled all the POP settings and worked just with SMTP. It was mostly luck that got me here.
Regards!
This multifunction machine was operating correctly at one location, but once moved ten minutes down the road, the scan to email function completely ceased operation.
It's also really, really frustrating that this machine just fails to send, with next to no feedback as to why.
So, let's dive in and see what happened here.
We moved the machine from one township to another. Once moved, all local functions were fine, but getting it to scan to email no longer worked. The outgoing scans simply came back as "NG" on the log screen.
My first mistake - not asking for "details" right away - and then mistake two - not realizing that the "details" page, when consulted, still was really useless. You get a three digit error code and nothing else. Here is the link for deciphering these error codes.
For starters, to make any changes either on the panel, or the web-based interface, you need to log in to the machine as an admin. The default admin name and password are both "7654321" - it will nag you to change these every time you log in. Be ready to skip this unless you are sure you want to swap them out. In my case, it was a SOHO, so there wasn't really a concern about locking down these settings.
Next up, you will need to consult your ISP about their outgoing SMTP ports - in our case, it was a fairly benign 587, but the scanner didn't default to that. I'll be jiggered if it's nearly impossible to find where to change that setting. You need to press the Settings/Registration button, quickly followed by 2 and 8 simultaneously, then Settings/Registration button once again. Then choose mode. Then choose copier (?), then choose option, then choose Network, then press <Level 1> so that it switched to <Level 2>.
Whew, then clicking directly on SMTPTXPN you can enter in a new port.
Press the Reset button to work your way back out of this menu.
Next up, I will relate the settings that worked for us, not necessarily what will work for you, but it should get you closer.
Now on the regular menu, hit up the Settings/Registration button again, and log in. Use the defaults if it hasn't been changed, otherwise, you're on your own.
Then Functions, Send, and Communication Settings.
On the first screen, enter your email address and SMTP server. POP RX is off, SMTP RX is on.
Next, SMTP TX is on, SMTP RX is on, POP should be greyed out.
Next, SMTP Authentication is on, display auth. screen is off, and the others are greyed out. Username is the full email address, and password is the email password.
That should be it. It took me pretty much a full day to finally get this just so. Hopefully it helps someone out there?
If it does fail, the error codes may be of limited use. Mine were throwing POP errors until I disabled all the POP settings and worked just with SMTP. It was mostly luck that got me here.
Regards!
Subscribe to:
Posts (Atom)